Baldor VEDM3615T 5HP, 1750RPM, 3PH, 60HZ, 184TC, 3642M, TEFC, F1 CENTRIFUGAL PUMP - TEFC

Baldor VEDM3615T 5HP, 1750RPM, 3PH, 60HZ, 184TC, 3642M, TEFC, F1 CENTRIFUGAL PUMP - TEFCSpecs Catalog Number VEDM3615T Enclosure TEFC Frame 184TC Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 5. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ 230. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA EEV NEMA PREMIUM NEMA_PREMIUM UR CCSA US Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary

2 SERVICE FACTOR AMPS PRIMARY 2

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CURUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 15

DATA 6318 FRAME 447T POWER FACTOR 87 CHP HZ 60-90 Performance

VEJMM2333T-5 SPEC

2 POLES 4 NUMBER SPEEDS 1 RPM 1735 RPM 2 1735 HERTZ 60 VOLTS PRIMARY 115/230 VOLTS 230 VOLTS 2 115 FRME 184 SHAFT CODE JP ASSEMBLY POSITION F1 MOTOR TYPE DM1 OPPOSITE END BEARING 6204-2Z-J/C3 SHAFT END BEARING 6307-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

52 IN Power Factor 71 Product Family Wash Down Pulley Face Code Standard Rodent Screen None Service Factor 1

15 SHIPPING WEIGHT 33 THERMAL PROTECTION NONE BREAKDOWN TORQUE 168

D XP Division Division II Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Mobil SHC 220 (Athens Only) Constant Torque Speed Range 30-60 Current @ Voltage 334

875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 3470 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

2x(Code G) No load current 104 A Rated torque 443 ft

G8-165-60 Parts

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 8 AWG Motor Type 1056M Mounting Arrangement F1 Number of Poles 4 Overall Length 28