Motive Video - R33 Passenger Side Ducted Headlight - Nissan R33 Skyline Manufacturer_Turbosmart

Motive Video - R33 Passenger Side Ducted Headlight - Nissan R33 Skyline Manufacturer_TurbosmartOur R33 Skyline GT R ducted headlight fits GT R. It can be made to fit a GTS t with modification (sanding) as GT R guards are wider than GTS t. The ducted headlight bolts in and comes with all brackets required. Please note that due to various different headlight arrangements and plugs during the R33 life cycle, we do not provide the headlight with a plug. The park headlight comes with spade terminals on the end of the wires so you can easily wire it

won't loosen even in the extremely high temperatures of all out racing performance

Doing a manual conversion or restoration on your R33/R34 coupe

Listen to one or two knock sensors

when designing this kit we set out to create a non-balancer-based trigger wheel as balancer casings tend to 'wander' far too much

Diameter: 10mm (3/8")

Gasket Included

which is super uncommon when purchasing a conversion

Recommended External Pull-Up Resistor: 5Volts DC = 1k Ohms 9 Volts DC = 1

vacuum fitting

*The cast bellhousing also can be sold separately to suit RB 2WD vehicles and allows fitment of a TH400 or Powerglide gearbox running either an OEM or REID casing

Adding these washers will allow you to fit those GTST headlights directly to your GTR at a fraction of the price of genuine s3 gtr headlights (see link here)

and the silicone hose is also available in two colours