Bando 150-S3M-552 S3M Timing Belt OVERLOAD RELAYSBando 150 S3M 552 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,
124 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 1800 rpm Motor Standards NEMA Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Drawings
2 POLES 2 NUMBER SPEEDS 1 RPM 3525 RPM 2 3525 RPM 3 3505 RPM 4 2900 RPM 5 2900 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 380 VOLTS 5 190 FRME 215 SHAFT CODE JM MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE UTE4 OPPOSITE END BEARING 6206-2Z-J/C3 SHAFT END BEARING 6309-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
7 SERVICE FACTOR AMPS PRIMARY 9
Bando - 2104-8M-30 Synchro-Link® HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds
3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 14 AWG Motor Type 3754M Mounting Arrangement F1 Number of Poles 4 8 Overall Length 20
613 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS F LOCKED ROTOR AMPS 1
US Motors3323H
550 kW) Number of Poles 6 Frequency 50 Hz Rated speed 955 rpm Slip 4
143 HP - OPEN - 3450 PHASETYPE 1_SPLIT PHASE MOTOR ENCLOSURE OPEN HORSEPOWER
3 RPM 3450 FRAME 48 SER
Hub to Hub: 5-3/8"
Bando - 150-S3M-774UK Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile
