Gunsmithing Products - Sling Swivel Threading Pilot -- SSTP bar

Gunsmithing Products - Sling Swivel Threading Pilot -- SSTP bar

the four specialty rings in this series with only 1 tightening screw at top of the ring are only available in black satin finish

Front mount is offset by approximately 3/8 of an inch

Heights as measured from the closest contact point at the receiver to the bottom of the ring cradle

Cooper changed to the larger diameter 8-40 receiver screws in 2018

for receivers drilled and tapped for the standard 6-48 screws (most common)

Need to ensure the mounting begins in the front (lightly screw in the front two screws) attach the rear two screws and torque them to no more than 25 inch-lbs then go back and torque the front screws to the same

300 Weatherby

4oz Medium

Works with Talley Premium Steel Scope Rings

Supplied with torx head wrench

for current Remington Model 7

The extended version places the scope forward toward the muzzle by about 1 inch more as compared to the non-extended version