Fasco D1157 OEM Replacement Motor, 1/15 HP, 1 Ph, 50 Hz, 115/208-230 V, 1350/1640 RPM, 1 Speed, 3.3" Diameter, OAO ADAPTORS

Fasco D1157 OEM Replacement Motor, 1/15 HP, 1 Ph, 50 Hz, 115/208-230 V, 1350/1640 RPM, 1 Speed, 3.3" Diameter, OAO ADAPTORSOEM Direct Replacement Motor 3. 3" Diameter Permanent Split Capacitor (PSC); Capacitor Required: 6 Mfd 370 Volts (Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Sleeve Bearing 5 16" Diameter Shaft with Flat 14. 5" Leads Extended Studs Shaft End Additional Information Thermal ProtectionThermally Protected Speed1350 1640 rpm Current1. 00 0. 38 0. 66 0. 36 A Number of Speeds1 Ambient Temperature40 C ULRecognized

86 IN Power Factor 71 Product Family General Purpose Product Type BRAKE MOTOR Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

4199 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3752M Mounting Arrangement F1 Number of Poles 4 Overall Length 21

00 % Rated voltage 400 V Rated current 56

00 IN Power Factor 77 Product Family Chem Process S/P 32-8 IEEE 841 Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

6 POLES 6 NUMBER SPEEDS 1 RPM 1185 HERTZ 60 VOLTS PRIMARY 200 VOLTS 200 FRME 324 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

08 FULL LOAD AMPS PRIMARY 10

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready KVA Code N Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3520M Mounting Arrangement F1 Number of Poles 4 Overall Length 12

5 POLES 2 NUMBER SPEEDS 1 RPM 3500 HERTZ 60 VOLTS PRIMARY 230 VOLTS 230 FRME 215 SHAFT CODE JM ASSEMBLY POSITION F1 MOTOR TYPE DM4 OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6309-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

38 IN Power Factor 71 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

Frame Material Cast Iron Impregnation Method Constant Resin Flow Regreasing System At Drive end and Non-drive end Main terminal box hole 2xNPT 3" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 203A (ISO 12944 - C2) Grounding Lugs Double Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 6 Features

EHM3710T-5 SPEC