Bando P144-14M-55 HT QD Timing Belt Pulley (F) AIR HANDLING

Bando P144-14M-55 HT QD Timing Belt Pulley (F) AIR HANDLINGBando P144 14M 55 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

Run Light and Fault Light Enclosure rating Type 4 Nominal height 1200

09 IN Power Factor 76 Product Family General Purpose Pulley Face Code Standard Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1

Frame 160M/L Output 11 kW (15 HP) Number of Poles 2 Frequency 50 Hz Rated speed 2955 rpm Slip 1

Amperes 833 A LRC 4

702 Ohms B Ph Start Configuration DOL Break-Down Torque 1

6 POLES 6 NUMBER SPEEDS 1 RPM 1140 HERTZ 50 HERTZ 2 60 VOLTS PRIMARY 208-230/460 V VOLTS 208 VOLTS 2 230 VOLTS 3 460 FRME 56 SHAFT CODE Y STATOR DIAMETER 6

Frame size 225 Trip type Fixed thermal and magnetic Rated current 40

Frame 324/6TC Output 40 HP (30 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1475 rpm Slip 1

Catalog Number AOM3615T Enclosure TEAO Frame 184T Frame Material Steel Frequency 60

Output HP1/160 - 1/120 Hp

22 IN Power Factor 77 Product Family Wash Down Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

5 No load current 13