Bando P56-8M-20 HT QD Timing Belt Pulley (SDS) Timing BeltsBando P56 8M 20 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1425 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Load 40° C Start Configuration DOL Break-Down Torque 258 LB-FT Pull-Up Torque 113 LB-FT Locked-Rotor Torque 143 LB-FT Starting Current 243 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
0 Inches Static Pressure: CFM = 620
7x(Code J) No load current 23
Catalog Number EM2548T Enclosure OPSB Frame 404T Frame Material Steel Frequency 60
101 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 1
25 % Rated voltage 460 V Rated current 81
Amperes 1202 A LRC 7
67 % Rated voltage 415 V Rated current 446 A L
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 150 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
UKCA and RoHS CHINA Language Without Type Kit Attributes
VFSWDM3559-E SPEC
