Bando P36-14M-115 HT QD Timing Belt Pulley (SF) Unit Bearing MotorsBando P36 14M 115 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
34-6242Z132 KW/HP
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1725 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location EP Winding Thermal 2 None Drawings
Model_Number HA45 PRODUCT NAME 5 HP - TEFC - 1760 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 5 KILOWATTS 3
Catalog Number VFSWDM3711T-E Enclosure TEFC Frame 215TC Frame Material Stainless Steel Frequency 60
36K190S505G3 HP 5 VOLTS 575 AMP 4
6 A Number of poles 3 Short-circuit release 13 x Iemax Rated operational voltage Ue 690 V Rated operational frequency 50/60 Hz Rated insulation voltage Ui 690 V Rated impulse withstand voltage Uimp 6 kV Utilization category - IEC60947-2 (motor starter protector/circuit breaker) A Utilization category - IEC60947-4-1 (Motor Starters) AC-3 Trip test Yes Overload protection Yes Phase failure sensitivity Yes Trip indication No Tripping class 10 Maximum operating frequency (ops
750 HP @ 50 HZ 1
Frame 404/5JP Output 75 HP (55 kW) Number of Poles 6 Frequency 60 Hz Rated speed 1185 rpm Slip 1
Amperage64/32
375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1770 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings
Bando - B157 Continuous improvements in materials
Amperes 3222 A LRC 8
