Bando SDS 2 QD BORE 2 (2.000) CLOSE COUPLED ODP

Bando SDS 2 QD BORE 2 (2.000) CLOSE COUPLED ODPBando SDS 2 The original sheave and pulley mounting system developed to facilitate installation and replacement of components. The QD (Quick Detachable) design provides for both conventional (flange outboard) and reverse (flange inboard) mounting configurations.

Communication protocol Ethernet/IP Protection TE - PTC and earth leakage sensor Digital input voltage 24VDC Supply voltage 110-240V 50/60Hz-DC Downloads

7x(Code E) No load current 36

Bando - 268MXL9

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 16

Catalog Number ECP3687T-4 Enclosure TEFC Frame 182T Frame Material Iron Frequency 60

5 LB-FT Starting Current 109 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

6 a Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter IP Rating NONE KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Type 3428L Mounting Arrangement F1 Number of Poles 4 Overall Length 15

ECS100T4H5EB4 SPEC

Start Configuration DOL Break-Down Torque 427 LB-FT Pull-Up Torque 187 LB-FT Locked-Rotor Torque 246 LB-FT Starting Current 330 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Weight (lbs)90

1 FULL LOAD AMPS PRIMARY 2

36 A Rated torque 5