Packard 40515 3.3 Inch Diameter Motor 1/30 Hp, 115 Volts, 1550 Rpm LENSES (CONTROLS)

Packard 40515 3.3 Inch Diameter Motor 1/30 Hp, 115 Volts, 1550 Rpm LENSES (CONTROLS)Additional Information Motor Voltage115 Amps1. 30 BrandPackard BearingsSleeve Country of OriginCHINA Diameter (In.)3. 3 EnclosureOpen H. P. 1 30 Hertz60 Length Less Shaft (In.)2 5 8 Motor TypeShaded Pole Mounting OptionStud NEMA Frame3. 3 Overload ProtectionAutomatic PhaseSingle RPM1550 Shaft Dimensions (In.) Dia x Lgth5 16 x 2 3 8 Speeds1 UPC840899107905 Voltage115 Packard80756 FascoD515 UniversalU 29 Century29 US Motors9627

98 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 4

lb Locked rotor torque 240 % Breakdown torque 280 % Locked rotor time 32s (cold) 18s (hot) Moment of inertia (J) 131 sq

CTM4110T SPEC

29 A Rated torque 33

25 LB-FT Pull-Up Torque 18

930 Line Amps 19

7 POLES 4 NUMBER SPEEDS 1 RPM 1760 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 184 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6206-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Frame 254/6JP Output 7

10" Leads with Terminal Housing

lb Locked rotor torque 240 % Breakdown torque 240 % Locked rotor time 34s (cold) 19s (hot) Moment of inertia (J) 0

375 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Phase Seq-Std Rot (CCWODE) Shaft Slinger Indicator No Slinger Speed 1785 rpm Speed Code Single Speed Motor Standards None Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None XP Temp Code T3 Drawings

VL3515-50 SPEC