Fasco D412 Draft Inducer Motor, 1/9 HP, 1 Ph, 60 Hz, 230 V, 3000/2500 RPM, 1 Speed, 3.3" Diameter, OAO SOFT-STARTER SSW05

Fasco D412 Draft Inducer Motor, 1/9 HP, 1 Ph, 60 Hz, 230 V, 3000/2500 RPM, 1 Speed, 3.3" Diameter, OAO SOFT-STARTER SSW05Draft Inducer Motor 3. 3" Diameter Permanent Split Capacitor (PSC); Capacitor Required: 4 Mfd 370 Volts (Supplied with Motor) Thermally Protected Open Shell, Enclosed Shaft End End Frame and Lead, Air Over Class B Insulation, 40C Ambient Ball Bearing 1 4" Diameter Shaft with Flat 21" Leads, 21" Switch Leads Extended Studs Shaft End, Lug Mount Additional Information Thermal ProtectionThermally Protected Speed3000 2500 rpm Current. 7 A Number of Speeds1

0 A Rated torque 326 ft

4x(Code H) No load current 15

AOM3556T SPEC

Catalog Number CDRX050744 Enclosure XPFC Frame 56C Frame Material Steel Frequency 50

6 POLES 4 NUMBER SPEEDS 1 RPM 1775 HERTZ 60 VOLTS PRIMARY 200 VOLTS 200 FRME 284 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6309-2Z-J/C3 SHAFT END BEARING 6309-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

lb Locked rotor torque 170 % Breakdown torque 200 % Locked rotor time 61s (cold) 34s (hot) Moment of inertia (J) 313 sq

Load 50° C Start Configuration DOL Break-Down Torque 6

155 ID MN416A01 TAG-INSTAL-MAINT no wire (2100bx)4/22

15 STARTCAPMFD N\A SHIPPING WEIGHT 345 BREAKDOWN TORQUE 317 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 238 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER H LOCKED ROTOR AMPS 523 NEMA NOMINAL EFFICIENCY 93

2x(Code J) No load current 1

125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3565 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Wye Start - Delta Run Thermal Device - Bearing None Thermal Device - Winding None Drawings

48 V 50/60 Hz Color Gray Attributes